Pit TraceF1 Engineering Intel

PIT WALL ONLINE · R17 DOCS INDEXED

2026 · ROUND 03
permanent

Japanese Grand Prix

Suzuka Circuit

Sun, 29 Mar 2026

Demand
Downforcehigh2025BrakinglowTractionmedTyrehighCoolinglow2025

The Japanese Grand Prix has 16 confirmed FIA car-presentation upgrade rows from 7 teams, with 11 parc fermé changes. Red Bull Racing has the most upgrade rows (4).

Grid penalties and power unit changes

11 new PU elements this weekend.

Upgrades

16

PU Changes

11

Parc Fermé

11

Teams Active

11

Most Active

RBR

4 upgrades

Top categories:Aero 15Mechanical 1

Race classification

Official finishing order from the FIA final classification, shown next to the upgrades each team listed for this weekend.

Results are context. They do not show whether any listed part worked.

Source: FIA Final Classification, Doc 59
TeamFinishUpgrades listed by the FIA
MercedesP1 and P4Upgrades listed by the FIA: 0
McLarenP2 and P5Upgrades listed by the FIA: 0
FerrariP3 and P6Upgrades listed by the FIA: 2
AlpineP7 and P16Upgrades listed by the FIA: 3
Red Bull RacingP8 and P12Upgrades listed by the FIA: 4
Racing BullsP9 and P14Upgrades listed by the FIA: 0
HaasP10 and DNFUpgrades listed by the FIA: 1
AudiP11 and P13Upgrades listed by the FIA: 0
WilliamsP15 and P20Upgrades listed by the FIA: 1
CadillacP17 and P19Upgrades listed by the FIA: 2
Aston MartinP18 and DNFUpgrades listed by the FIA: 3

DNF did not finish. DNS did not start. Not classified means the sheet gave no reason. DSQ disqualified. EXC excluded. WD withdrawn.

Team
Component
Type
Category
Status

Confirmed FIA upgrades: 16 rows from 7 teams

4 upgrades

Max VerstappenMGU-KNEW2nd of 3PU AncillaryNEW2nd of 6
Rear CornerCircuit specificCooling Rangelow coolingRevisedConfirmed

Revised inlet and exit geometries Given the braking energy demands of Suzuka, minor changes have been made to the rear wheel bodywork to suit the brake material requirements.

FloorPerformanceFlow ConditioningRevisedConfirmed

Upper surface revised to meet new sidepod Consequential changes to meet new sidepod geometry and extending forward to the chassis, benefitting from the efficiency to offer more load.

Sidepod InletPerformanceFlow ConditioningRevisedConfirmed

Revised inlet and therefore surrounding to meet chassis and floor.

To ingest higher pressure air to the sidepod inlet from upstream, the profile has been revised based upon simulation and initial running results yielding improved efficiency

Coke/Engine CoverPerformanceFlow ConditioningRevisedConfirmed

Surfaces adapted to meet the new sidepod inlet geometry As a consequence of the inlet changes, the sidepods have been revised to suit and offer an efficiency improvement for cooling and downstream surfaces.

3 upgrades

Front CornerPerformanceFlow ConditioningConfirmed

Front deflector redesigned The front deflector has been redesigned to improve the management of the local flowfield, ensuring a consistent delivery of performance throughout the entire operating range.

Rear Wing EndplatePerformanceLocal LoadConfirmed

Re-designed of the lower part of the Rear Wing Endplate The end plate has been redesigned to improve the flow conditioning at the rear of the car while also generating local load.

Rear WingPerformanceLocal LoadConfirmed

SM pod fairing and reprofiled elements Local adjustments have been made to the rear wing to extract more performance out of it, both in Cornering and in Straight mode.

AeroReported

So yes, it might seem like only one upgrade package, but there really is a lot more at stake for Alpine at Zandvoort.

Covered by FIA

AeroReported

But even though Greenwood insisted Alpine has stayed "in the race" while it's held back on new parts, it will head into the second half of the season with much riding on an upgrade package being brought to the Dutch GP.

Covered by FIA

3 upgrades

Lance StrollEnergy StoreNEW2nd of 3Control ElectronicsNEW2nd of 3
Fernando AlonsoPU AncillaryNEW3rd of 6
Floor BodyPerformanceLocal LoadRevisedConfirmed

The floor leading edge devices have been revised. The new floor leading edge devices modify the spanwise generation of load across the width of the floor to improve performance.

Front Wing EndplatePerformanceLocal LoadConfirmed

The edge of the outboard footplate is raised.

In conjunction with the front wing change the modifications improve the load distribution at the outboard end of the wing.

Front WingPerformanceLocal LoadConfirmed

The chord of the 3rd front wing profile is shorter in conjunction with a reduced length strake.

In conjunction with the front wing endplate change the modifications improve the load distribution at the outboard end of the wing.

2 upgrades

DiffuserPerformanceLocal LoadConfirmed

Lower edge detail change on diffuser fence The diffuser fence has been redesigned with a lower profile to enhance overall ride height behaviour and improve aerodynamic performance across the operating envelope.

DiffuserPerformanceLocal LoadRevisedConfirmed

Updated central diffuser trailing edge profile The trailing edge profile of the diffuser has been revised and optimized to enhance overall performance and increase overall rear aerodynamic load.

2 upgrades

Floor BodyPerformanceLocal LoadRevisedConfirmed

Revised front floor stay fairing profile Minor geometrical update and not specific to this event, the reprofiling of the front floor stay fairing improves local flow features and returns floor performance gains v v Atlassian Williams F1 Team 2

Front CornerPerformanceLocal LoadConfirmed

Reduced front brake duct inboard exit area

The Suzuka Circuit braking duty allows us to introduce a smaller front brake duct geometry, trading off brake cooling for external aerodynamic performance benefits

HaasHAA

1 upgrade

Front WingPerformanceFlow ConditioningConfirmed

The FW SM actuation system was simplified allowing smaller exposed geometries The FW SM linkage was simplified, enabling a reduced external envelope.

The smaller linkages decrease blockage and consequently improve the airflow directed towards the rear of the car.

1 upgrade

Front SuspensionPerformanceStructural ImprovementRevisedConfirmed

Compared to the launch car, a revised set of suspension claddings are available to package efficiently around the updated suspension structures.

The incidence and profiles of the external claddings have been optimised to work effectively with the new internal suspension structures to ensure that the impact on the downstream flow field is mitigated. Atlassian Williams F1 Team 3